If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Molybdenum-telluride (MoTe2) can be described as a gray powder used to lubricate in many fields.
Purity: 99.99%
Particle Size: -100 Mesh
Molybdenum Telluride MoTe2 Pulver:
Molybdenum, telluride (MoTe2) (a gray, hexagonal, powdered solid) is stable in air. It can also be soluble or insoluble in water. Many fields use Molybdenum-telluride as a solid lubricant.
Molybdenum-telluride is a combination of molybdenum (or tellurium) and molybdenum. It has a mass ratio of 27.32% and 72.68% respectively. The two-dimensional crystallization can lead to sheets of molybdenum that can then be dispersed into flexible and transparent monolayers. It is also a semiconductor. It fluoresces. It’s part of the transition-metal halogenated material. It is a semiconductor and the bandgap can be found in infrared. This opens up the possibility of using semiconductors in infrared and electronic detectors. TRUNNANO is an international trusted
Mollybdenum Telluride MOTe2 Powder supplier. You can send us an inquiry regarding the
Molybdenum Telluride current price at any given time.
Molybdenum Telluride MoTe2 Pulp Performance:
MoTe2 (a gray hexagonal, powdery solid) can come in many morphologies. MoTe2 (and Mo3Te4) are the most stable and easily decomposes in water. It is not soluble or soluble with water. However, it can be decomposed (not melt) at very high temperatures in vacuum.
Technical Parameters of Molybdenum Telluride MoTe2 Pulp :
Product name |
|
Purity |
Particle Size |
Molecular Weight |
CAS |
|
MolybdenumTelluride |
MoTe2 |
99.99% |
–100 mesh |
351.14 |
12058-20-7 |
Gray Black |
What is Molybdenum Telluride MoTe2 Pu ?
Molybdenum forms a number of compounds homogeneous with sulfur, tellurium, and selenium. Molybdenum disulfide(MoS2) (MoS2) molybdenum selenide (MoS2) molybdenum tritelluride [MoTe2] are all heterogeneous, isophase compounds. Combining the elements at high temperature in a vacuum tube seals these compounds.
MoTe2 is Motex x=1.882; Mo3Te4 forms when MoTe2 and Mo3Te4 react within fifteen minutes at 430
Reactive: Mo+2Te → MoTe2
Applications for Molybdenum Telluride MoTe2 Pulch –
MoTe2 can be used to make lubricants or electronics.
MoTe2 is a low-power material that can make transistors. FETs are composed of nanolayers that can be thicker, thinner, or three-layered. There has been a bipolar and P-mode field-effect transistors, along with a top-electrode field-effect transistor.
MoTe2 can be constructed in two forms, a 2H and 1T’ semiconductor.
MOSFETs may consist of MoTe2 layered over a membrane of liquid electrolyte or an ionic liquid. If the gate voltage drops below 2 volts the device is in electrostatic mode. The current drain-source ratio is dependent on the gate voltage. Above 2 volts the current increases but the device is no longer in electrostatic mode. If potassium atoms are added to the MoTe2 Layer, electrolysis can occur. A current higher than 3.5 volts is allowed through the gate. Potassium-intercalated molybdenum dilubride is superconducting at 2.8 K.
The lubricant molybdenum dilutride is good at working in vacuum at temperatures of up to 500 °C and a friction coefficient lower than 0.1. But molybdenum ditelluride has less friction than molybdenum sulfide, while molybdenum dilenide is capable of functioning at higher temperatures.
Molybdenum Ditelluride forms at the contact point. Small pieces of the molybdenum-ditelluride nanolayer can then be mixed in the molten-tin, without the need to react, increasing the stiffness.
A atomic force microscope has examined molybdenum ditelluride as a protein substrate. This is because it sticks to proteins better than conventional materials, such as mica.
Molybdenum Telluride MoTe2 Pulp –
MoTe2 powder’s dispersion and usage performance will be affected by moist reunion. MoTe2 should therefore be stored in vacuum packaging and in a dry, cool place. Molybdenum informuride must not be exposed to any air. MoTe2 should not be exposed to stress.
Packing & Shipping of Molybdenum Telluride MoTe2 powder :
There are many options for packing, which all depend on the quantity of molybdenum-telluride MoTe2 Powder.
Packing of molybdenum-telluride MoTe2 MOTe2 powder: vacuum, 100g to 500g or 1kg/bag 25 kg/barrel. Or as you request.
Shipping of Molybdenum-telluride MoTe2 MoTe2 powder:
can be sent by sea, air or express, once the payment has been received.
Molybdenum Telluride Properties
|
molybdenum ditelluride, molybdenu(IV) telluride,
MoTe2 powder
12058-20-7 |
Web Compound Formula |
MoTe2 |
Molecular Weight
351.14 |
Appearance |
Grey Black Powder |
Melting Point |
N/A |
Heating Point |
N/A |
Density |
7.7 g/cm3 |
Solubility of H2O |
N/A |
Exact |
355.716 |
Molybdenum Telluride Health & Safety Information
|
Danger |
Hazard Statements |
H301-H332 |
Hazard Codes |
T |
Risk Codes |
N/A |
Security Statements |
N/A |
Transport Information |
UN 3284 6.1 / PGIII |
Inquiry us
