High Purity 3D Printing Inconel Alloy In625 Powder

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

Inconel 625 superalloy is made from high-performance nickel and has high resistance to high temperatures, corrosion and other corrosive agents.

About 3D Printers Inconel625 Powder: Incoal 625is high-performance Nickel-based superalloy well-known for its strength, high temperature resistance and corrosion resistance.
alloy 625 contains a majority of nickel (68% or more), with trace amounts of silicon, manganese, aluminum and magnesium. Nickel alloy 625 has the ability to withstand extreme pressures and temperatures.

Inconel 625 melting temperature is around 1300degC and conel 625 heat expansion coefficient of 1.28 x 10-5-1 1/K at 20degC. This material can tolerate extreme temperatures of all types, including very low and extremely high. Alloy 625 Materialdensity: 8.4 grams/cm3. It is resistant to both inorganic and chemical corrosives in reduced and oxidation environments. This product is highly resistant to carbonation and oxygenation in static environments or circulating conditions, as well chlorine-containing gascorrosion.
Inc625 alloys are extremely resistant to corrosion in many media. The alloy’s outstanding resistance to intergranular and pitting corrosion, erosion in chloride media and crevice corrosion make it an excellent choice for nuclear and maritime applications.
625 MaterialExhibits exceptional corrosion resistance in wide variety of media. Very good resistance to crevice corrosion as well as pitting and intergranular corrosive. Chrome 625 exhibits good resistance to inorganic chemicals, including nitric, phosphoric, sulfuric, and hydrochloric acids. The nickel 625 is also resistant to organic acid and alkali corrosion. Excellent resistance to corrosion stress cracking caused by chloride-ion reduction stress. This product has a high level of corrosion resistance in salt and seawater, and is non-corrosive at high temperatures. No sensitivity to oxygen and carbonation in static environments or circulating. Also, it is immune to chlorinated gas corrosion.

To obtain the most current Inconel price, please send us an inquiry. We offer inconel 625 tube as well as inconel 625 plates and inconel sheets.

Inonel 625 is a Nickel-based Alloy
(percentage of mass)










Max 1



Max. 0.015









Maximum of 0.4

0.01 max

Max 5

Maximum of 0.5

Maximum of 0.5

Max. 0.015

Maximal 0.07


Grades and specific characteristics of alloys

The alloy number

Powder of nickel-based alloy IN625

The particle size

15-45mm, 15-53mm, 53-120mm, 53-150mm






Aluminum bag, Vacuum packing


Powder for 3D printing of metal

Others applications

powder metallurgy(PM), injection molding(MIM), spraying coating(SP) etc.

It is simple. 3D Printing Inconel 625 produced?
The specification of Inconel 625 determines the composition and production methods.
The heat treatment of alloys is essential to increase its toughness.
Annealing at high temperature: For up to one hour, heat the solution in a bain. After that cool off with room air. You will get an alloy that is extremely resistant to creep.
Low-solubility anodizing: It is similar to high-solubility anodizing but at a lower temperature, 925-1040degC. The alloys created have excellent tensile strength as well as ductility.
Relaxation: For up to four hours soak the product at 900degC and then cool it in the ambient air. This product is strong and resilient to low temperature environments.
To forge Inconel 625 it must be heated to between 1010°C and 1150°C. Below this temperature range can result in hardness. The material may need to be reheated.

3D Printing Inconel 625 Uses :
Inconel 625 Applications
The low-carbon alloy 625 has been widely adopted in the chemical industry after softening annealing. Because of its high strength and corrosion resistance, low carbon alloy 625 can be used as a structural component.
Marine applications
Inconel 625’s high corrosion resistance is ideal for use in subsea environments with high salt levels. This material can be used for propeller blades on ships, mooring lines to fix ships and other similar ships, accessory and fixture for submarines, marine equipment, and parts for maritime equipment.
Aerospace equipment
Inconel 625 superalloys have also been used for aircraft parts, particularly in exhaust equipment and fuel pipes.
Nuclear technology
Inconel 625 has the strength, corrosion resistance and stress resistance that make it an ideal component for nuclear reactors. This includes control rods and cores. Inconel625 is able to withstand high temperatures up to 650 degrees Celsius.
Industrial processes
The alloy can be easily manufactured and is resistant to corrosion and high temperatures. It’s a valuable component in manufacturing equipment, such as valves, heat exchangers and vessels. Because of its excellent welding ability, it is a good component for pipe components in manufacturing plants.

Storage Conditions of Inonel Alloy In625 Pulp:
Inconel alloy in625 powder will suffer from damp reunion. In625 powder must be stored in vacuum packaging and in cool dry rooms. The Inconel alloy In625 Powder should also be kept away from stress.

Packing & Shipping of Inconel Alloy Powder In625:
We offer many packing options that are dependent on the Inconel powder In625.
Vacuum packaging of In625 alloy powder:100g, 500g or one kilogram/bag. 25kg/barrel. Or as you request.
Powder shipping of Inconel alloy, In625: Could be sent by sea, air or express as soon after receipt payment.

Lempotee advanced materials Nano Technology Co. Ltd., (Lempotee), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12 years’ experience providing high-quality chemicals.
Send us an enquiry if you’re interested in high-quality powder In625. (brad@ihpa.net)

Inconel Alloy In625 Powder Properties

Other Titles INCO 625
Compound Formula Ni Cr Fe Nb
Molecular Weight N/A
Appearance Metallic Powder
Melting Point 1290-1350 degC
Solubility In Water N/A
Density N/A
Purity 99%
Size 15-45mm, 15-53mm, 53-120mm, 53-150mm
Boling Point N/A
Specific Heat N/A
Thermo Conductivity 9.8 W/m*degC (21 degC)
Thermal Expansion N/A
Young’s Module N/A
Exact N/A
Monoisotopic N/A

Powder Health & Safety Information

Safety Notice Danger
Hazard Statements H317-H351-H372
Flashing Point N/A
Hazard Codes Xn
Risk Codes N/A
Safety statements N/A
Transport Information NONH on all transport modes
WGK Germany N/A

Inquiry us