Molybdenum Disulfide Has Good Lubricity

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

It is not only very resistant to corrosion, but it also has great lubricating properties. This is why it’s the most efficient agent for the lubrication and protection of metals. A moistening treatment can help to lubricate molybdenum dioxide. You can also apply a phosphate coating to provide lubrication.
Rust Preventing Properties
Molybdenum Disulfide or Moly, a solid lubricant that is well-known for its low friction coefficient (low coefficient), is very popular. It’s used to lubricate machines, tools and equipment. It can be used to prevent corrosion.

It is made of a naturally occurring molybdenum concentrate. The lubricant has an extremely low reactivity and is able to be used in many temperatures. This makes it nonsticky, which prevents friction and wear. To increase the lubrication of greases, it can be mixed with moly. Moly is used often in blends that increase the lubrication.

In the early 17th century, graphite was mistakenly called molybdenite. After much research it was discovered that molybdenite is capable of lubricating metallic parts. Also, molybdenite could be used to provide lubrication for writing materials.

Molybdenum Disulfide is a common coating used for high-pressure and other applications in which liquid lubrication may not be possible. The coefficient of friction is also low. MoS2 coatings can improve durability, strength, reliability, and other important parts.

Molybdenum disulfide has a crystallized layered structure. It exhibits a low coefficient of friction. This is dependent on cleanliness, humidity and the cleanliness of surfaces. MoS2’s lubrication efficiency is superior to that of graphite.

This lubricant layer is made from a sulfide coating that acts as an interface between solid and liquid. To maintain the lubricating coating, this layer interacts with the moly. You can easily remove the lubricant film by cleaning them ultrasonically.

Molybdenum Disulfide-coated coatings are used for friction reduction in many applications. They are useful in increasing the machine’s load capacity as well as other important equipment. These coatings have low friction coefficients and protect against corrosion. They are often used on space vehicles.

Molybdenum diulfide can be used to enhance the strength and durability of composites. It is a great lubricant and can extend the equipment’s lifespan. It can also be used in railway tracks joints, the food industry and tolubricate locks. This anti-seizure fluid is also available. It excels at water and fire resistance.

The bribricity of molybdenum disulfide
The molybdenum dioxide, among the many lubricants available, has an excellent lubricity when subjected to high pressure. The compound can be used in an organic polymeric mixture with M–O backbone as a binding agent. The compound is also suitable for heat and wear resistance. But, it is not a good binder.

A threaded join with a solid oil film is an option to a joint that does not use compound grease. But, it has not been proven to be effective. However, this method is very difficult to achieve a solid bond between the film and the liquid lubricant. Additionally, contact surfaces may experience a lower coefficient of friction due to the film. You must ensure that your film is lubricated with the proper amount.

As examples, the molybdenum thiophosphate dialkyl, calcium stearate, and molybdenum sulfate solid lubricants were used. It is recommended that the average particle diameter for solid lubricants should not exceed 0.005 micrometers. With a particle size greater than 3 micrometers, it is difficult to evenly disperse the particles. At least 0.3% must be the minimum mass ratio in solid lubricant. The solid lubricant should also contain at least 9.0 Mass Percent.

But, it is not clear how the increased lubricity affects the mass ratio. As an example, the Japanese Published Unexamined Patent Application Hei 8–233164 lubricating oil contains molybdenum sulfide. One part contained graphite powder.

A minimum of 15 mgKOH/g must also be the total base amount for the lubricating films. Because rust forms easily when there is a lower total base number than 15. But, as the base number increases, so does the coefficient of friction.

A phosphate film
Many years of research have been conducted on molybdenum disulfide. The material provides corrosion protection, high yield strength, low friction, and is an excellent lubricant. You can also use it in bit lubrication.

Molybdenum Disulphide coateds come in a variety of strengths, including wear and corrosion resistance. These coatings can be used for large loads.

MoS2’s use has grown rapidly in the recent decades. The material can lubricate even in extreme vacuum conditions and retain its slippery qualities. This material is still in its early stages of development. It is essential to continue research.

Molybdenum disulfide, in addition to being slippery, is also of geothermal origin. The molybdenum disulfide is composed of sulfur and molybdenum elements and has a hexagonal structure with layered crystal lattices. MoS2 crystallites don’t contain alcohols like hydrocarbons. Instead, they are separated through sieving.

MoS2 films are effective for lubricating high vacuum environments. But, this is only possible if condensable gases are present. MO& films with a lower coefficient of friction are made without condensable gases.

MoS2 also has a lower friction factor than ZDDP. MoS2 films can reduce spalls by a factor of two, which is not possible with ZDDP films. The wear of contact points between high carbon steel surfaces can be reduced by using this material for lubrication. It can be used as a lubricant in hydrostatic bearings.

This material is used in lubricating oil. You can combine it with ISO VG 32 White Oil to decrease friction. When the original lubricant is not available, it acts as a backup lubricant. It can also resist pressure and high temperatures. This material cannot be used in food contact.

Apart from its lubricating qualities, molybdenum dioxide has strong affinity for metallic surfaces. It’s also very easy to cleave. This makes it an ideal dry film lubricant.

Molybdenum dioxide has a low coefficient for friction. However, it is not suitable as a lubricant in contact with food. This material is similar in structure to graphite.

A moistening treatment
As a moistening treatment, molybdenum disulfide is able to improve the strength of composite materials and minimize their deformation. The unique structure of molybdenum disulfide is what gives it its exceptional lubricity. It is an excellent lubricant and molybdenum dioxide has a low toxicity, which makes it suitable for many applications.

To test their lubrication behaviour, graphite and silver were mixed with a liquid oil lubricant. These additives had an impact on the lubrication behaviour of the lubricant. This was confirmed by traction tests. These lubricants provided reasonable protection from wear and were tested at temperatures ranging from room temperature up to 540 C. It was also tested to withstand temperatures as high as 200 C.

A solid lubricant’s friction coefficient was also evaluated. A ketone-lubricant showed a stronger boundary lubricating action than an aldehyde one. It had a coefficient of friction around 0.25. Its wear rate averaged 3×10-7mm3/Nm.

On average, the wear factor varied from 35 to 58 10–6mm3/Nm. It was found that wear volume is affected by motions applied to test pins. The metacarpal wear coefficient was 21 10-6mm3/Nm.

Catalytic action from the coatings allows for dehydrogenation linear olefins within lubricating oil. They can also be used to scissor carbon-carbon backbones as well as facilitate the dehydrogenation linear olefins. They reduce the equivalent stress.

It is necessary to carefully develop molybdenum diulfide in order to make a lubricant. It’s a dark, solid compound. The crystal structure of the compound is composed of lamellae that are weakly bonded. This makes it difficult for these lamellae to be squeezed out by high pressure. They can fill and stick to surfaces.

This lubricant films has a low coefficient-of friction and is resistant to Special Medium. Because of the low compressive strengths and impurities, it can be difficult to make a molybdenum-disulfide bonded coating. Other materials can be used for coating.

It is essential to make a bonded molybdenumdisulphide coating to ensure good lubrication. This can be used to lubricate in corrosive environments or under high pressure.

Molybdenum Diulfide Powder Prices
Price is affected by many things, such as market trends, supply and demand, market sentiment and economic activity.
Send us an enquiry to get the Molybdenum Disulfide Pulp price. (

Molybdenum Disulfide Pulverizer
Lempotee advanced materials Nano Technology Co. Ltd., (Lempotee), is a respected Boron Carbide supplier. They have over twelve years’ experience. All of our products are available for shipment worldwide.
We can help you find Molybdenum Disulfide Pulver. Please contact us to send us an inquiry. (

Inquiry us